Aortic Valve Repair, Replacement and Surgery
Aortic Valve Repair
* Repair of the structural support. This is when the surgeon will shorten the cords that support the valves. When theses valves are shorter it will allow the aortic valve to close completely.
* Reshaping is where the aortic valve is cut and then sewn back together in a new shape. Reshaping the aortic valve will allow it function properly. When the valve becomes misshaped it cab have difficulty regulating blood flow.
Aortic Valve Replacement
* A mechanical valve will be put in place of your natural aortic valve. These mechanical valves are made out of polymers or metals. The mechanical valves are very safe and will ideally last for a lifetime.
* Using human donated tissue or animal tissue is a permanent solution to a faulty aortic valve. The tissue will be used in place of the pre-existing aortic valve. Surgery that involves using tissue is very effective at first but gradually becomes weaker and weaker as time goes by. The aortic valve will need to be replaced every 10 to 20 years if tissue is used.
* A small incision of 3 or 4 inches will be made on the chest. The incision will act as the entry point that the surgeon will use in order to insert the new aortic valve.
Aortic valve repair, replacement and surgery should be a serious consideration if your aortic valve is leaking or not functioning properly otherwise. Make sure to work with a qualified surgeon in order to get the best, most effective results.
Comments 0
EmoticonEmoticon